Spectrum Analyzer: Octave RTA shows the sound around you as a live FFT curve, octave bands and a spectrogram on your phone or tablet. It is an audio analyzer for musicians, home studios, sound engineers, car audio fans and students who want to see which frequencies are really there.
Point the microphone at a speaker, an instrument or a humming fridge and read the strongest frequency, its note with cents, the level in dBFS and the whole curve from 20 Hz to 20 kHz. This audio spectrum analyzer refreshes up to 60 times per second, and all processing stays on your device.
What you get
• Live FFT with 1024 to 16384 points, Hann, Hamming, Blackman-Harris and flat-top windows, averaging and octave smoothing
• Spectrum analyzer audio FFT view on a log or linear axis with pinch zoom and a cursor readout
• Peak hold with adjustable hold time and decay, included for everyone
• Real time analyzer with 1/1 and 1/3 octave bands and A, C or Z weighting
• Spectrogram with a glowing heat-map waterfall
• Frequency analyzer readout: peak frequency, note and cents, harmonic markers and approximate THD
• Oscilloscope view with a stable trigger
• Approximate SPL mode with your own calibration offset or an imported mic calibration file
• Feedback finder marks narrow peaks that keep ringing, so you know which frequency to cut
• Target curve for room and car audio tuning with per-band deviation, two markers with Δf, ΔdB and musical interval, and a Quick Settings tile that starts listening in one tap
• Signal generator: sine, square, white noise, pink noise and sweeps, with a volume safety limit
• Freeze, save snapshots with a name and note, compare curves, export PNG or CSV
• Import CSV curves from other measurement tools and restore a snapshot backup file
• 10 presets, from room tuning with pink noise to mains hum, voice and birdsong
• Short guides on FFT size, windows, weighting and room tuning
• Tablet layout: the audio analyzer shows the spectrum, waterfall or RTA and the readouts side by side
Why this app
• This spectrum analyzer app works offline, with no account
• The microphone signal is analyzed in memory and never recorded or sent
• Automatic gain control and noise suppression are switched off where your phone allows it, so the audio spectrum analyzer sees the real signal
• The real time analyzer and the frequency analyzer keep running when you rotate the screen or switch views
• Available in 35 languages
An honest note: phone microphones are not calibrated measurement microphones. Levels are relative (dBFS), SPL is an estimate unless you calibrate it against a sound level meter, and many phone mics are weaker below about 100 Hz and above about 12 kHz. A USB audio interface can be selected as the input where Android supports it.
About ads: a small banner sits below the controls, and full-screen ads never interrupt a measurement. One optional short video removes all ads for 10 minutes. Videos also unlock extras for 24 hours: CSV export, 16384-point FFT with 1/6 octave bands, extra waterfall color maps, sweep generator and curve comparison. Peak hold, PNG export and pink noise are always included.
Audio spectrum analyzer with live FFT, octave RTA, spectrogram and a generator